Gypsum is diluted in a separate container and subsequently both solutions are mixed until the necessary mass is obtained. Remember that such a solution is called rapidly drying....
Читать дальшеGypsum is diluted in a separate container and subsequently both solutions are mixed until the necessary mass is obtained. Remember that such a solution is called rapidly drying....
Читать дальшеApproximate expense: per 100 pieces of brick when masonry with a flat side and thickness of the seams of 5 mm consumption about 20 liters. But for laying...
Читать дальшеTo. The gas permeability of the entire constructed structure depends on it. The elastic solution will betray the seam with a sufficient density, filling all the non -evenness....
Читать дальшеSalt additives are added to a proportion of 100 to 250 g per bucket of solution, and cement from ¾ l per bucket. Before adding cement, it must...
Читать дальшеThe composition should resemble sour cream in its consistency. But if inconvenience occurs in the process, then the solution can be diluted by adding water and mixing thoroughly,...
Читать дальшеAfter that, the resulting solution must be filtered through a small mesh and thereby we will clean the clay from all unnecessary impurities. The composition of the clay...
Читать дальшеAll methods for preparing a solution for laying furnaces are almost the same. The differences are only in the percentage of the components included in their recipe, the...
Читать дальшеThere are also gypsum -fiber sheets for walls on the construction market, which, in turn, are divided into non -moisture resistant and moisture resistant.
Читать дальшеTheir choice should be approached especially carefully. In particular, you should know that low -format plates of 1.5x1 meters and 10 millimeters thick are best suited for the...
Читать дальшеThe freed surface should be cleaned of garbage, and all the gaps available on it are relied on a carefully cement mortar. Next, the selected type of insulation...
Читать дальше