On the finished floor lies the boards so as not to walk on the tile. Every other day you remove excess cement from the surface of tiles with...
Читать дальшеOn the finished floor lies the boards so as not to walk on the tile. Every other day you remove excess cement from the surface of tiles with...
Читать дальшеThen you should mix cement with water and pour this solution into the recess of the seams (only along the seam). Rub out a plaster grater inclined at...
Читать дальшеThe floor level is checked for them. The solution is filled with free space. Now you need to lay out a row. Start from the lighthouse. For each...
Читать дальшеTo glue the tile, apply a small layer of glue to the base and wait 10-15 minutes until it dries. Apply glue to the tiles and press to...
Читать дальшеThe method depends on the composition of the glue. If it is based on synthetic resins, rubber, then start from the front door, and if you have dispersion...
Читать дальшеConsider the procedure for laying tiles on the floor. To find out how much it will be needed, you need to measure the area of the room, take...
Читать дальшеSteam in such a bath is created due to the evaporation of liquid. Fireplane stoves are usually installed in the bathhouse. Special stones are laid out on top...
Читать дальшеAfter the foundation, there is a queue to set the walls. Here, having even skills, you can not do without an assistant. Usually a log house of logs...
Читать дальшеSince the bathhouse is not very cheap, before the direct construction, you need to weigh your financial capabilities. If the funds are not enough, you can always take...
Читать дальшеIt can be done with your own hands, like everything else. The columnar foundation will be the most suitable for such a building, but the strip will also...
Читать дальше