Then turn on the drill (or machine) and gradually move the polishing circle along the intended area. Constantly spray the glass with water, avoiding drying the polishes and...
Читать дальшеThen turn on the drill (or machine) and gradually move the polishing circle along the intended area. Constantly spray the glass with water, avoiding drying the polishes and...
Читать дальшеDilute 80-150 gr. Powder with tap water to a pasty state. Fasten the mandrel in a drill or a polishing machine. Attach a felt circle to the surface...
Читать дальшеStock up also with paper wipes covering the film, liquid for washing glasses, painting tape, marker, spray gun and overalls. Wash the car and in the process of...
Читать дальшеWhen polishing the glass, a slight layer is removed, so the danger of the effect of the "lens" and distortion is absent. For work, you will need: a...
Читать дальшеpreparation (glass cleaning); polishing; The final sink of glasses. Before starting work, you need to determine the degree of damage to the glasses. If there are even small...
Читать дальшеTherefore, for the safety of road traffic, it is necessary to eliminate defects on the windshield in a timely manner. This procedure will also help return the original...
Читать дальшеIt is scientifically proven that with visual tension the general condition of the body worsens, irritability and distraction appear. The constant feeling of discomfort experienced by the driver...
Читать дальшеDuring the operation of the car, scuffs, scratches and matte areas are formed on the surface of the glasses. The reason for this may be the grains of...
Читать дальшеIt is best done in polishing the bumper in a ventilated and light room. You can polish without removing the bumper from the car, but in this case...
Читать дальшеPut a polishing machine at the average speed and carefully walk throughout the bumper, rubbing the polishing agent over its entire surface. 7. At the end of the...
Читать дальше